Full Size Platform Storage Bed Cubbies
Full size platform storage bed – extra storage is one of the most sought after additions for do-it-yourself homeowners. A practical way to get lots of extra storage without compromising floor space is to create furniture with built-in storage. A cubby platform bed is a piece of furniture that provides plenty of extra storage space when you use it often wasted space under the bed. An attractive and robust cubby platform bed does not require expert knowledge of carpentry or joinery tricky, so most handy homeowners can complete the project with ease.
Build a full size platform storage bed cubbies, sand and paint all the plywood pieces and edging the cubby storage bed. Slot five sheets of 15-by-19-inch plywood in between the two 76-inch planks, with the two outer sheets flush with the ends of the 76-inch planks and the remaining three evenly spaced between them. Drill three evenly spaced pilot holes the size of a half-inch screws through the sides of 76-inch panels in the adjacent ends of the 15-by-19-inch divider. Place a sheet of 16 1/2-by-76-inch half-inch plywood over the top of the 76-inch panels and dividers.
After that for build full size platform storage bed cubbies. Turn the unit so that one of the 76-inch panels is flat on the ground, with the open sides of the unit towards you. Position the cubby units back-to-back, which will create a unit for bed base that is 40 by 76 inches, or twice the size. Attach a 76-inch strip of 1-inch border along the top and bottom of each 76-inch side of the bed base using finishing nails. Attach a 14/2-inch strip of 1-inch edge of each of the dividers using finishing nails. Touch up visible nail or screw holes with color before you place the bed in place and sits on top of a mattress.