DIY Upholstered Twin Bed Headboards
Twin bed headboards – Bed heads drawing attention to the focal point of the bedroom the bed while improving and accentuate the style of the room. Typically, a decorative object, headboards can be an expensive decor accessory to be. With a little planning, some knowledge and a few tools, you can create a custom headboard and saving a significant amount of money in the process. A simple rectangular headboard covered with a nice fabric is a good first project for two twin beds.
Determine the desired height of the twin bed headboards. If it is purely decorative, be any size, but is usually not less than 12 centimeters. Measure the width of the mattress – is a twin bed 37 or 39 cm wide. Cut a piece of 1/2 inch plywood same width as the bed headboard and the chosen height. Cut a piece of 1- or 2-inch thick foam the same size plus 1/2 inch all around. Place the ethylene on the table and centering the foam on the beryline.
Wrap the ethylene through foam up to the plywood and staple in the 1/2-inch wide cutting edge of the plywood. Wrap and staple around the circumference of the multiplex. Cut off the excess beryline at the edge of the plywood. Place the fabric on the table, wrong side up and center the beryline side of twin bed headboards on the matter. Stay stapling each side, from the center to every corner, making the cloth taut and smooth.