Creative Queen Size Platform Bed with Storage
Queen size platform bed with storage – First, cut your planks and plywood to the necessary lengths. Sand all faces in your timber. Then, seen a 78-inch plank and a 60-inch plank together in an L shape, with the end of the longer plank are adjacent to face shorter. With two L-braces, Attach the plank and set inside corner, each rail set 3 inches from one of the edges of the planks.
Set the other 60-inch plank against the free end of the 78-inch plank. Fasten with two L-belts as before. Slide 78 to the other inch plank between the two 60-inch planks, parallel to the first board 78 to inch and 20 inches away from it. Fasten with two L-braces in each corner as before. Next steps to build queen size platform bed with storage is place plywood onto the top of the frame, you have built, side by side, with their outer edges are flush with the outer edge of the frame.
Turn down plywood resting on the open side of the frame by means of a wood screw for each corner. Drive screws through the sheets and into the edge of the plank below. Connect the other sheet to the first using your five hinges. Screw the hinges in place with the supplied screws. Tighten the screws to 6 inches, 26 inches, 40 inches 54 inches and 74 inches from an edge. Last, sand the outside faces of your queen size platform bed with storage with fine-grit sandpaper. Paint or stain as desired.