Creative King Bed Frame with Storage
King bed frame with storage – one, Set a 76-inch plank and an 80-inch plank together in an L-shape. Connect them with two L-regulation on the inside of the corner of the L. Place an L seals 2 inches from the top and one two inches from the bottom. Two, connect other 76-inch plank to the other end of 80-inch board, making a C -shape. Connect in the same way as you did in Step 1, with two L-braces. Three, place the other 80-inch plank at the midpoint of the two 76-inch boards parallel to the first 80-inch plank. Screw it into place with two L-braces for each shorter plank.
Enter one plywood sheet on the open side of the frame of king bed frame with storage. It should be arranged so that the inner edge is aligned with 80-inch plank running down the center. Screw it into place with a wood screw for each corner of the plywood sheet. Five, put the second plywood sheet next to the one you just installed. Its inner edge should be flush against the edge of the first plywood sheets. Its outside edge should be flush with the outside 80-inch plank.
Attach the plywood sheets using your six hinges, distance between each 10 inches. Slide one post under the lip of plywood on the open side of the bed frame. Screw it in place 16 inches of plank that forms the end of the bed, using one screws drilled into the plywood and into the middle of the end of the post. Attach the other three posts with the same method, each placed 16 inches away posts you mounted before it. King bed frame with storage was done.