California King Bed Frame with Storage Design
California king bed frame with storage – King-size beds are huge, with a footprint of over 40 square meters, which is why they are popular. Building a storage bed frame of your king mattresses can turn the footprints of 60 cubic meters of storage space. This project will take two or three hours after you’ve collected your timber.
build a California king bed frame with storage, Fit a 76-inch plank, and a 78-inch plank in an “L”, which connects them with two L-braces on the inside corner. Place each rod three inches from the edge of the wood. Connect it with two L-braces, ask three inches from the edge of the wood on the inside corner. Connect it with two L-braces on the inside corners, as you did with the other timber in the previous steps. Place a sheet of plywood down over the open side of the frame you’ve built, with its inner edge flush with the middle of the central 78-inch plank.
Lay the second sheet of plywood down on the other side of the frame, tight against the plywood sheet that you have screwed down. Slide a post under the plywood on the open side of the California king bed frame with storage, 16 inches from a 78-inch plank, and its outer surface flush with the edge of the plywood. Secure it with two wood screws drilled through the plywood at the end of the post. Attach the other posts in the same way, every 16 inches from the post you just installed.